The FP7 Drum Pack contains a combination of f2, f5 and f6 dynamic microphones and the f9 condenser for overheads.
PRE-PACKAGED SETS OF HIGH QUALITY DRUM AND PERCUSSION MICROPHONES
Audix revolutionized drum and percussion miking by designing instrument specific microphones. With the introduction of the Fusion Series, Audix created two attractively priced packages for todays up and coming professionals.
The FP7 Drum Pack contains a combination of f2, f5 and f6 dynamic microphones and the f9 condenser for overheads. The f5 is tuned for snare drum and can be used as well for bongos, timbales, guitar cabinets and acoustic instruments; the f2 dynamic microphone is ideally suited for rack and floor toms, congas, djembe, bongos, timbales, brass and woodwind instruments. The f6, with its extended bass response, is designed for kick drum, bass cabinets, cajon and other low frequency instruments. The f9 condenser microphone is intended for cymbals and hi-hat.
Built to withstand the rigors of live stage applications, the Fusion Series microphones are also excellent for rehearsal, school, House of Worship and a wide variety of home recording applications.
Caractéristiques
Applications
All-in-one solution for drum miking
Instrument-specific mics for optimal results
Cost-effective
Rugged Audix quality
Aluminum carrying case
What's In The Box
1 x f5 Snare Microphone
3 x f2 Rack and Floor Tom Microphones
1 x f6 Kick Drum Microphone
2 x f9 Overheads Microphones
6 x DCLIP Microphone Clips
4 x DFLEX Microphone Clips
1 x MC1 Microphone Clip
Aluminum Road Case
Spécifications
f2 Transducer: Dynamic Frequency Response: 52 Hz - 15 kHz Polar Pattern: Hypercardioid Output Impedance: 580 ohms Sensitivity: 2 mV / Pa @ 1 k Maximum SPL: 139 dB OFF-axis rejection: 20 dB Power Requirements: None Materials / Finish: Zinc Alloy/ Black Finish Weight: 247 g / 8 oz Length: 104 mm / 4.09 in
f5 Transducer: Dynamic Frequency Response: 55 Hz - 15 kHz Polar Pattern: Hypercardioid Output Impedance: 580 ohms Sensitivity: 2.2 mV / Pa @ 1 k Maximum SPL: 137 dB OFF-axis rejection: 20 dB Power Requirements: None Materials / Finish: Zinc Alloy/ Black Finish Weight: 283 g / 10 oz Length: 145 mm / 5.7 in
f6 Transducer: Dynamic Frequency Response: 40 Hz - 16 kHz Polar Pattern: Hypercardioid Output Impedance: 580 ohms Sensitivity: 1.2 mV / Pa @ 1 k Maximum SPL: 140 dB OFF-axis rejection: 23 dB Power Requirements: None Materials / Finish: Zinc Alloy/ Black Finish Weight: 311 g / 11 oz Length: 121 mm / 4.76 in
f9 Transducer: Pre-polarized Condenser Frequency Response: 40 Hz - 20 kHz Polar Pattern: Cardioid Output Impedance: 200 ohms Sensitivity: 8 mV / Pa @ 1 k Maximum SPL: 137 dB OFF-axis rejection: 24 dB Power Requirements: 12 - 48 V Phantom Materials / Finish: Zinc Alloy/ Black Finish Weight: 95 g / 3.3 oz Length: 111 mm / 4.37 in
