Elite condenser microphone for vocals and acoustic instruments. Cardioid, 40 Hz " 20 kHz, 21 mm gold vapor capsule, multi-stage internal pop filter. Requires 48- 52 V phantom power
The VX10 condenser vocal microphone was designed to set new performance standards for live sound and broadcast applications. With a uniformly controlled frequency response from 40 Hz " 20 kHz, the VX10 is highly sensitive to transient response and will reproduce vocals and speech with exceptional detail and realism.
The VX10 has a cardioid polar pattern which helps isolate vocals. This mic includes a 21 mm gold vapor capsule and a multi-stage internal pop filter. It is also available in a low output model (VX10LO) for greater control with loud stage volumes or extremely powerful vocalists.
Aside from vocals, the VX10 cardioid condenser microphone will capture acoustic instruments such as guitars, woodwinds, brasses, percussion toys, drum overheads, hi-hats, and pianos.
Designed, assembled, and tested by Audix in the USA.
Spécifications
Transducer Type: Condenser
Frequency Response: 40 Hz " 20 kHz
Polar Pattern: Cardioid
Output Impedance: 250 ohms
Sensitivity: VX10 " 24 mV / Pa @ 1k VX10LO " 4 mV / Pa @ 1k
Equivalent Noise Level: 19 dB (A-weighted)
Signal to Noise Ratio: 5 dB
Off Axis Rejection: 20 dB
Maximum SPL: ?138 dB (w/ -10 pad)
Power Requirements: 48-52 V
Connector: 3-pin XLRm
Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
Materials / Finish: Zinc Alloy & Machined Brass / Black Finish
Weight: 310 g / 10.9 oz
Length: 180 mm / 7.1 in
WHAT'S IN THE BOX:
1x VX10 Vocal Microphone
1x Lined Wooden box
1x MC1 (opens a new window) Microphone Clip
1x P1 Carrying pouch
