The Denon Professional Flash Start Remote is for event operators in the most demanding live situations, including sporting events, theaters, radio and TV stations. Designed for 500 and 700 Series Denon Professional media players and recorders, the Flash Start Remote utilizes RS-232C commands to initiate cues and transport control of the connected devices. Audio and sound FX files can be easily assigned to each of its twenty Hot Start buttons for instantaneous triggering of any sound file.

Control Denon media players via RS-232C
Instantly START / STOP audio files
Tape recorder-style buttons for transport and cues
Single cable solution, powered by RS-232 (Denon device) or Micro-B USB option
Scribble strips for naming Hot Start buttons
Micro-B USB connects to PC for firmware updates, requires no special PC software
Supports Denon Professional models:
DN-500BD
DN-500BDMKII
DN-500CB
DN-501C
DN-500R
DN-700C
DN-700CB
DN-700R
DN-900R

Connectors
(1) RS-232C 9-Pin D-Sub Female Connector
(1) USB-B Port

RS-232C Connectivity
Transmission System:
Asynchronous full duplex

Data:
8 bits (Start Bit: 1 Bit; Stop Bit: 1 Bit)

Parity:
None

Flow Control:
None

Baud Rate:
Selectable (9600, 38400, or 115200 b/s)

RS-232C Pin Arrangement
Pin 1:
GND

Pin 2:
TxD

Pin 3:
RxD

Pin 4:
NC

Pin 5:
GND

Pin 6:
NC

Pin 7:
NC

Pin 8:
NC

Pin 9:
NC

Power:
Via USB connection

Consumption:
0.3W

Environmental Requirements
Operating Temperature:
41 - 95F (5 - 35C)

Storage Temperature:
-4 - 140F (-20 - 60C)

Operating/Storage Humidity:
25% - 85%, non-condensing

Dimensions (width x depth x height):
10" x 4" x 1.1"
255 x 100 x 29mm

Weight:
1.5 lbs.
0.7kg