MPN #4099-DP-1-201-B    
DPA 4099-DP-1-201-B

$865.00

Financing available
Free shipping in Canada. Conditions

4099 CORE+ Mic, Loud SPL with Clip for Bass<



Next-generation, high-performance instrument microphone featuring CORE+ technology, delivering
pristine, natural and undistorted sound with exceptional isolation and off-axis rejection for any live
or studio setting. Fitted with MicroLock and a series of upgraded instrument clips for even better
stability and flexibility on any type of instrument.
  • CORE+ technology
  • High SPL handling
  • Wide dynamic range
  • Supercardioid pick up pattern
  • Superior gain before feedback
  • MicroLock connector
  • IP58 certified
  • Advanced, flexible clip program
  • General Specifications
    ? Directional pattern: Supercardioid
    ? Principle of operation: Pressure gradient
    ? Cartridge type: Pre-polarized condenser
    ? Colors: Black

    Frequency Response
    ? Frequency response: 20 Hz " 20 kHz
    ? Effective frequency range (±2 dB at 20 cm / 7.9 in): 80 Hz " 17 kHz with 2 dB soft boost at 10"12 kHz

    Sensitivity & Noise
    ? Sensitivity (nominal, ±3 dB at 1 kHz): 6 mV/Pa; -44 dB re. 1 V/Pa
    ? Sensitivity selection tolerance (at 1 kHz): ±1 dB
    ? Equivalent noise level (A-weighted): Typ. 23 dB(A) re. 20 ?Pa (max. 26 dB(A))

    Distortion & Sound Pressure Level
    ? Distortion, THD < 0.5%: 135 dB SPL RMS, 138 dB SPL peak
    ? Distortion, THD < 1%: 138 dB SPL RMS, 141 dB SPL peak
    ? Max. SPL, THD 10%: 145 dB SPL peak
    ? Dynamic range: Typ. 118 dB

    Electrical Specifications
    ? Rated output impedance: 30 " 40 ? (MicroLock), 100 ? (DAD9099 or DAD9001)
    ? Cable drive capability: Up to 300 m (984 ft) with DAD9001/DAD9099 XLR Adapter
    ? Output balance principle: Signal balanced with DAD9099 or DAD9001 XLR Adapter
    ? Common mode rejection ratio (CMRR): > 60 dB from 50 Hz to 15 kHz with DAD9099 or DAD9001 XLR

    Adapter
    ? Polarity: +V at MicroLock pin for positive sound pressure (and pin 2 on DAD9099 or DAD9001 XLR adapter)

    Power Requirements
    ? Power supply (for full performance): 5 V " 10 V through DPA adapter (wireless), P48 or 12 V via DAD9001 or DAD9099
    ? Current consumption: Typ. 1.5 mA (microphone), 3.5 mA with DAD9099 or DAD9001 XLR Adapter

    Mechanical Specifications
    ? Connector: MicroLock
    ? Microphone diameter: 5.7 mm (0.22 in)
    ? Microphone length: 50 mm (1.97 in)
    ? Cable length: 1.8 m (5.9 ft) (not included with 4099-DP-1 and 4099-DP-2)
    ? Cable diameter: 1.6 mm (0.06 in) / 2.2 mm (0.09 in)
    ? Gooseneck length: 140 mm (5.5 in)

    Environmental Specifications
    ? Operating temperature range: -40C to 45C (-40F to 113F)
    ? Relative humidity (RH): Up to 90%

    Weight
    ? Microphone: 18 g (0.63 oz)
    ? Microphone Clip for Accordion (A-CLIP): 5 g (0.18 oz)
    ? Clamp Mount Microphone Clip (CM-CLIP): 16 g (0.56 oz)
    ? Microphone Stand Clip (MS-CLIP): 24 g (0.85 oz)
    ? Microphone Clip for Piano (P-CLIP): 20 g (0.71 oz)
    ? Universal Microphone Clip (U-CLIP): 15 g (0.53 oz)
    ? Instrument Microphone Clip for Guitar (GC4099): 12 g (0.42 oz)
    ? Instrument Microphone Clip for Sax and Trumpet (STC4099): 7 g (0.25 oz)
    ? Instrument Microphone Clip for Violin and Mandolin (VC4099): 10 g (0.35 oz)
    ? Instrument Microphone Clip for Bass (BC4099): 20 g (0.71 oz)
    ? Microphone Clip for Cello (C-CLIP): 18 g (0.63 oz)
    View more products from DPA
    DPA Logo
    Now accepting
    Financing available
    Like us
    Follow us
    ©2004-2025 - Studio Economik Inc.® All Right Reserved.