The d:fine Series of headsets has the leading position when it comes to head worn microphones. Combining pristine audio quality with unique and simple mechanical solutions.
The d:fine Slim Directional Headset Microphone rejects side and background noise while creating higher separation from nearby sound sources. This improves the gain-to-feedback ratio and gives more channel control. Yet natural voice intelligibility is preserved. The mic also has very high SPL capabilities. You can both speak and sing into the mic with no hint of distortion.
Windscreens, a capsule protection cap, a cable clip (to anchor the cable to your clothing) and a color-coded cable clip (offering easy recognition of a specific headset among many) are included.
Flexible adapter system
The adapters for wireless systems give you flexible, simple and affordable possibilities. You are no longer bound to one wireless system. As circumstances change, you can just switch your adapter, instead of incurring the cost of a whole new microphone. And when you make the switch, you won't hear any loss or change in sound quality.
The d:fine, d:screet and d:vote series of miniature microphones work with all leading wireless mic solutions, such as Lectrosonics, Sennheiser, Shure, Sony, Wisycom, Zaxcom and many more. DPA Microphones' ingenious adapter system is one of a kind in the industry. It protects your investment in fantastic sound for years to come.
Pristine audio qualityEasy single-ear or dual-ear mountingMinimal visual impactModular adapter system fits most professional wireless systems
Directional characteristics: OmnidirectionalPrinciple of operation: PressureCartridge type: Pre-polarized condenserFrequency range: 20 Hz - 20 kHzFrequency range, ± 2 dB: 20 Hz - 20 kHz with 3 dB soft boost at 8 - 15 kHzSensitivity, nominal, ± 3 dB at 1 kHz: 6 mV/Pa; -44 dB re. 1 V/PaEquivalent noise level, A-weighted: Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))Equivalent noise level, ITU-R BS.468-4: Typ. 38 dB (max. 40 dB)S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 68 dB(A)Dynamic range: Typ. 97 dBMax. SPL, peak before clipping: 144 dBOutput impedance: From MicroDot: 30 - 40 . From DAD6001-BC: 100Cable drive capability: Up to 300 m (984 ft) with DAD6001-BC XLR adapterOutput balance principle: Signal balanced with DAD6001-BC XLR adapterCommon Mode Rejection Ratio (CMRR): > 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR adapterCurrent consumption: Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR adapterConnector: MicroDotColor: Black or beigeWeight: Microphone boom: 0.8 g (0.03 oz). Earhook: 1.1 g (0.04 oz). Cabel: 6.6 g (0.23 oz). Total: 8.5 g (0.30 oz)Microphone diameter: 5.4 mm (0.2 in)Polarity: +V at MicroDot pin for positive sound pressure (and pin 2 on DAD6001-BC XLR adapter)Cable length: 1.3 m (4.3 ft)Cable color: Black or beigeCable diameter: 1.6 mm (0.06 in)Electro Magnetic Compatibility (EMC): Fully compatibleTemperature range: -40 to 45°C (-40 to 113°F)Relative Humidity (RH): Up to 90%
View more products from DPA