Sometimes convenient mounting and consistent output are the primary requirements. In these cases, the d:screet Necklace 4061 Microphone is the right solution. With MicroDot
The mic features the legendary d:screet? 4061 Miniature Omnidirectional Capsule in a soft rubber necklace.
This d:screet? Necklace 4061 Microphone is the best choice for fast, repeatable and "do-it-yourself" mounting. The mic is designed for use by non-technicians. It is, for example, the perfect choice for a reality show setting.
With low noise and high sensitivity, the d:screet? Necklace 4061 Microphone offers the most clear, transparent, and natural sound available on the miniature mic market. This condenser mic is capable of handling up to 154 dB peak before clipping. It has a linear response, low distortion and a large dynamic range. This necklace mic sounds great no matter the application.
The mic comes in three colors: black, white and brown. It is available in two lengths: 47 cm (18.3 in) or 53 cm (20.9 in).
Flexible adapter system
The adapters for wireless systems give you flexible, simple and affordable possibilities. You are no longer bound to one wireless system. As circumstances change, you can just switch your adapter, instead of incurring the cost of a whole new microphone. And when you make the switch, you won't hear any loss or change in sound quality.
The d:fine?, d:screet? and d:vote? series of miniature microphones work with all leading wireless mic solutions, such as Lectrosonics, Sennheiser, Shure, Sony, Wisycom, Zaxcom and many more. DPA Microphones' ingenious adapter system is one of a kind in the industry. It protects your investment in fantastic sound for years to come.
Necklace Length: 47
Black - SCO61B00-N47Brown - SCO61F00-N47White - SCO61W00-N47
Plug and play mountingConsistent outputMinimal visual impactModular adapter system fits most professional wireless systems
Directional pattern: OmnidirectionalPrinciple of operation: PressureCartridge type: Pre-polarized condenserFrequency range: 20 Hz - 20 kHzFrequency range, ±2 dB: High boost grid: 20 Hz - 20 kHz, 10 dB boost at 12 kHzSensitivity, nominal, ±3 dB at 1 kHz: 6 mV/Pa; -44 dB re. 1 V/PaEquivalent noise level, A-weighted: Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))Equivalent noise level, ITU-R BS.468-4: Typ. 38 dB (max. 40 dB)S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 68 dB(A)Total harmonic distortion (THD): < 1% up to 123 dB SPL peakDynamic range: Typ. 97 dBMax. SPL, peak before clipping: 144 dBOutput impedance: From MicroDot: 30 - 40 . From DAD6001: 100Cable drive capability: Up to 300 m (984 ft) with DAD6001-BC XLR AdapterOutput balance principle: Signal balanced with DAD6001-BC XLR AdapterCommon mode rejection ratio (CMRR): > 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR AdapterPower supply (for full performance): Min. 5 V to max. 50 V through DPA adapter for wireless systemsCurrent consumption: Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR AdapterConnector: MicroDot.Color: Black, brown or whiteWeight: 17 g (0.04 oz) incl. Cable and MicroDot connectorMicrophone diameter: 5.4 mm (0.21 in)Microphone length: 47 cm (18.5 in) / 53 cm (20.7 in)Cable length: 1.2 m (3.9 ft)Cable color: Black, beige or brownCable diameter: 1.6 mm (0.06 in)Polarity: Positively increasing sound pressure produces positive-going voltage at MicroDot pin (and pin 2 on DAD6001 XLR adapter)Temperature range: -40°C to 45°C (-40°F to 113°F)Relative humidity (RH): Up to 90%
View more products from DPA