Using ultralightweight aluminum wire and aluminum voice coils in its hand-crafted drivers, along with a Class D amplifier the BM Compact mkIII provides outstanding performance.

Aluminum voice coil former and wire are low mass so transient response is quick and accurate. Diaphragm and dust cap are moulded as one piece in patented low-mass, highly rigid Magnesium Silicate Polymer providing unrivaled accuracy.

Extended excursion 5.7" woofer with pure aluminum voice coil.

1.1" soft dome tweeter with pure aluminum voice coil.

Flexible operation with XLR and RCA inputs

Bundled with IsoAcoustics ISO-L8R155 speaker stand for decoupling and proper angling.

Optional Dynaudio Professional Volume Box for precision level control

Higher SPL, greater frequency and power response compared to the previous generation

50W LF and 50W HF RMS Class D amplifier with DSP crossover

116dB SPL peak power output

Frequency response of 49 Hz-24 kHz

Extended bass with BM9S II or 14S II precision subwoofers

HF, MF, LF analog room filters allow flexible positioning

High pass filters at 60/80Hz for perfect subwoofer matching

Input sensitivity switch (-10/+4dB range)

System: Two-way Active Precision Nearfield Monitor

Max SPL 1m, pair (IEC Short Term): 116 dB peak

Input level for 85 dB SPL @ 1m: 80 mVrms

Max input level (@setting): 4,8 Vrms (-10dB) 1,5 Vrms (0dB) 1 Vrms (+4dB)

Power consumption: Standby: 0.3 W Idle: 5.8 Max: 94 W

Amplifier power: Tweeter: 50 W Woofer: 50 W

Resonance Frequency: 58 Hz

Principle: Bass reflex

Crossover Frequencies: 2100 Hz

Crossover Slope: 12 dB/oct

Tweeter: D-281 - 28 mm soft dome, rear chamber, magnetic fluid 4 mm aluminum front Pure aluminum wire voice coil

Woofer: 145 mm molded aluminum frame/ one piece thermo formed MSP cone 38 mm voice coil with pure aluminum wire on aluminum former

Weight: 5,4 kg / 11.9 lbs

Dimensions (W x H x D): 170 x 260 x 211 mm / 6.7" x 10.2" x 8.3"/ 6.7" x 10.2" x 7.6"