Equipped with 4-pin XLR balanced outputNewly developed audio-grade capacitor is adoptedHighly precise crystal with low phase noise is adoptedPlayback 24bit/192kHz PCM and 11.2MHz DSD audioHigh performance DAC (Barrbrown PCM1792A) is equippedAsynchronous transfer up to 192kHz/24bit compatible with USB Audio 2.0HI/LO Gain selection (10dB) for wider selection of headphonesDigital Filter selecting Roll-Off characteristics and Cut-off frequencies
Input
USB terminal
Interface: USB 2.0 Hi SpeedSampling Frequencies: PCM 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz DSD 2.8MHz, 5.6MHz, 11.2MHzQuantization: 16bit, 24bit
Digital In terninal
Connector: Optical, SquareFormat: S/PDIFSampling Frequencies: 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHzQuantization: 16bit, 24bit
Output
PHONES BALANCED terminal
Connector: XLR (4-pin)Maximum output: 300mW or more (32 ohm)Load impedance: 16 - 600 ohmTHD: less than 0.04% (at 1kHz)Frequency Response: 20Hz - 80kHz (+-3dB, 32 ohm, 100mW)
PHONE UNBALANCED terminal
Connector: 1/4" stereo jackMaximum output: 150mW or more (32 ohm) Applicable load impedance: 16 - 600 ohmTHD: less than 0.04% (at 1kHz)Frequency Response: 20Hz - 80kHz (+-3dB, 32 ohm, 100mW)
OUTPUT (L,R) terninal (Analog output)
Connector: RCA PinReference output level: 2Vrms (0 dBFS) Applicable load impedance: less than 10k ohm THD: less than 0.01% (at 1kHz)Frequency Response: 20Hz-80kHz (+3dB)
DIGITAL OUT terminal
Connector: Optical (square)Format: S/PDFFrequency Response: 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHzQuantaization: 16, 24bit
General
microSD card slot (for firmware upgrade only)
Format: FAT32Compatible card: microSD card (SDHC), up to 32GBAccessories: Rubber foot (x4), USB cable, Manual, AC adapterPower supply: DC12VMeasurements: 150(W) x 34(H) x 157(D)mm including protrusionWeight:approx. 630g