If you need a larger monitor with high SPL, for mid-field, soffit or behind the screen applications, the LSR6332 is your choice. This three-way non-powered system can handle 200 Watts continuous pink noise/800 Watts peak and will generate 112 dB SPL at 1 meter. The LSR6332 incorporates a 12" Neodymium Differential Drive NDD dual coil woofer, 5" Kevlar midrange speaker and 1" titanium composite tweeter.

Advanced Linear Spatial Reference design ensures flatter response at the mix position.

Neodymium Differential Drive NDD technology with dynamic braking for extended low frequency response and low power compression.

Neodymium midrange with 2" voice coil and Kevlar cone material for extended frequency response and low distortion.

Titanium composite high frequency transducer with elliptical oblate spheroidal waveguide and damped polepiece.

High-Density baffle for low enclosure resonance and stable inertial ground.

Linear Dynamics Aperture port design eliminates port turbulence and reduces port compression.

Magnetically shielded for use near video monitors.

Reinforced enclosure and convenient mounting points allow mounted installation.

Midrange/high frequency sub-baffle may be rotated by user for horizontal or vertical orientation.

Available as mirror image left and right models.

Input Impedance: 4 ohm (Nominal)

Anechoic Sensitivity: 93 dB/2.83 V/1 m, (90 dB/ 1 W/ 1 m)

Frequency Response: +1. -1.5 dB, (60 Hz - 22 kHz)

Low Frequency Extension: -3 dB: 54 Hz, -10 dB: 35 Hz

Enclosure Resonance Frequency: 33 Hz

Long Term Maximum Power (IEC265-5): 200 W continuous average; 800 W peak

Recommended Amplifier Power: 150 W - 1000 W (rating into 4-ohm load)

High Frequency Control: 0 dB, -1 dB (2.5 to 20 kHz)

Distortion, 96 dB SPL: 1 m 2nd Harmonic (below 120 Hz): <1.5%, 3rd Harmonic (below 120 Hz): <1%, 2nd Harmonic (120 Hz to 20 kHz): <0.5%, 3rd Harmonic (120 Hz to 20 kHz): <0.4%

Distortion, 102 dB SPL, 1 m: 2nd Harmonic (below 120 Hz): <1.5%, 3rd Harmonic (below 120 Hz): <1%, 2nd Harmonic (80 Hz to 20kHz): <1%, 3rd Harmonic (80 Hz to 20kHz): <1% (<0.4%, 250 Hz - 20 kHz)

Power Nonlinearity: 30 W (20 Hz to 20 kHz): <0.4 dB, 100 W (20 Hz to 20 kHz): <1.0 dB

Low-Mid Frequency Crossover: 4th Order Acoustic Linkwitz-Riley: 250 Hz

Mid-High Frequency Crossover: 4th Order Acoustic Linkwitz-Riley: 2.2 kHz