500 Series, mono channel strip featuring Class A, discrete line amp, 10 Megaohm DI, Class A, discrete output amp, Custom wound UK output transformer, Pivot ?tilt style EQ?
Pivot TC/500 uses a powerful tone control pivot position EQ , a unique 3 position 'see-saw' EQ with 3 carefully selected pivot positions to cover low frequencies at 160hz, mid frequencies at 800hz and high frequencies at 1.6khz. A dark/bright shaping control, allows you to 'see-saw' the EQ to darken your mix (add LF) or brighten the mix (add HF).
There is a also a 10 position LED metering that accurately represents the output level.
The unit can also be used in bypass mode, the ouput control can be driven bringing in the Class A discrete output circuitry and output transformer to add analogue colour and saturation to any source, and a pair of units would be excellent on a mix bus or mastering.
Caractéristiques
Class A Discrete input line buffer amp
Class A Discrete 10meg ohm DI input
Class A Discrete output amp
Phoenix custom output transformer
Unique 3 position pivot point sloping EQ
Controllable LF, MF & HF pivot positions
Dark & bright tone control
Spécifications
Class A Stereo DI Output specs.
Frequency Response: 20Hz to 20Khz +/- 0.5dB
Maximum Output: +26dBu @ 1Khz
Noise: 90dB @ 22Hz to 22KHz
Class A, discrete, truly balanced transformerless input stage.
The Class A DI has a very high input impedance (10Mohm), without the use of FET's. This means that the guitar pickups are not loaded as with a lower impedance input, and so allows every transient to be reproduced, making even a cheap guitar sound exceptional
Inputs: 1/4" jack (TS) input & through input on the front panel
Transformer isolated balanced output (XLR) on the rear panel
EQ with 3 fixed pivot positions: 160hz, 800hz & 1.6khz