Super-cardioid/lobar microphone head with the K6P powering modules. For reporting, film, and broadcast location applications, as well as for picking up quiet signals in noisy room.
Sennheiser ME66/K6P Combo Shotgun Microphone System (Phantom Power Only)
The Sennheiser ME66 is a shotgun microphone capsule designed for use with the Sennheiser K6 and Sennheiser K6P powering modules. It is especially suitable for reporting, film and broadcast location applications and for picking up quiet signals in noisy or acoustically live environments as it discriminates against sound not emanating from the main pick-up direction. Matte black, anodized, scratch-resistant finish.
The Senneheiser K6 is the heart of the Sennheiser ME66 / K6 professional modular microphone system and can be powered either by its internal 'AA' size 1.5 V battery or by 12 - 48 V phantom power. The Sennheiser K6 can be combined with different condenser microphone heads to provide a wide variety of polar patterns. Matte black, anodised scratch-resistant finish.
Switchable bass roll-off filter protects against rumble, handling, pop and wind noise
Works on 12 - 48 Volt phantom power only
On/Off Switch with battery test position
High Output / Low Noise
Transformer-less Output on 3-pin XLR connector
Super-cardiod/lobar pickup pattern
Low inherent self noise
Wide frequency response
Dimensions: Ø 22,5 x 221 mm
Frequency response (microphone): 40 - 20000 Hz +- 2,5 dB
Sensitivity in free field, no load (1kHz): 50 mV/Pa +- 2,5 dB
Nominal impedance: 200 (K6)
Min. terminating impedance: 1000 (K6)
Equivalent noise level: 10 dB
Equivalent noise level weighted as per CCIR 468-3: 21 dB
Maximum sound pressure level (passiv): 125 dB / 1 kHz (K = 1%)