DAW plug-in for immersive headphone monitoring, tailored for Neumann headphones, supports formats up to 7.1.4, AMBEO algorithms, stereo externalization Experience three-dimensional, truly immersive... Lire la suite
Omnidirectional mic with K 30 capsule, SG 21 BK, WNS 100. Black color The "Series 180" consists of three compact miniature microphones with patterns that satisfy the demands of all common studio... Lire la suite
Windscreen made out of open-cell polyurethane foam for KK 104, 105, KMS 104, 105, 140 or 150, -27 dB wind noise attenuation, -3 dB @ 15 kHz Close range sounds, wind, and fast movements of the... Lire la suite
Headphone style windscreen for KU 100 , -15 dB wind noise attenuation, -3 dB @ 15 kHz Close range sounds, wind, and fast movements of the microphone boom, all may cause interfering noises. To avoid... Lire la suite
Windscreen made out of open-cell polyurethane foam for U 89 or TLM 193, -27 dB wind noise attenuation, -3 dB @ 15 kHz Close range sounds, wind, and fast movements of the microphone boom, all may... Lire la suite
Windscreen made out of open-cell polyurethane foam for U 67, U 87, TLM 103, TLM 50, TLM 127, M 147 Tube and TLM 170, -26 dB wind noise attenuation, -3 dB @ 15 kHz Windscreen WS 87 Close range sounds,... Lire la suite
Gray foam windscreen made out of open-cell polyurethane foam for Sennheiser ME67 and Neumann KMR 82i. -15 dB wind noise attenuation, -3 dB @15 kHZ Close range sounds, wind, and fast movements of the... Lire la suite
Windscreen made out of open-cell polyurethane foam for KMR 81 i, -15 dB wind noise attenuation, -2 dB @ 15 kHz Windscreen WS 81 Close range sounds, wind, and fast movements of the microphone boom,... Lire la suite
Windscreen made out of open-cell polyurethane foam for USM 69 and SM 69 fet, -20 dB wind noise attentuation, -3 dB @ 15 kHz Close range sounds, wind, and fast movements of the microphone boom, all... Lire la suite
Windscreen made out of open-cell polyurethane foam for D 01 Close range sounds, wind, and fast movements of the microphone boom, all may cause interfering noises. To avoid these unwanted sounds,... Lire la suite
Windscreen made out of open-cell polyurethane foam for KM 80, KM 100, KM 180 or KM D, -23 dB wind noise attenuation, -4 dB @ 15 kHz To avoid these unwanted sounds, windscreen accessories are... Lire la suite
Windscreen made out of open-cell polyurethane foam for KM 120, -18 dB wind noise attenuation, -2 dB @ 15 kHz Close range sounds, wind, and fast movements of the microphone boom, all may cause... Lire la suite
Acoustically transparent windscreen made out of open-cell polyurethane foam for KM 80, KM 100, KM 180 and KM D, -21 dB wind noise attentuation, -1 dB @ 15 kHz Close range sounds, wind, and fast... Lire la suite
Windscreen made out of open-cell polyurethane foam for KM 80, KM 100, KM 180 or KM D, -18 dB wind noise attenuation, -2 dB @ 15 kHz Close range sounds, wind, and fast movements of the microphone... Lire la suite
Extension for microphone stands The STV 4 stand extension is screwed between microphone stands (for example MF 4, MF 5) and swivel mounts (for example SG 21 bk). Length 40 mm. Ø 19 mm
Extension for microphone stands The STV 20 stand extension is screwed between microphone stands (for example MF 4, MF 5) and swivel mounts (for example SG 21 bk). Length 200 mm. Ø 19 mm.
Swivel mount for detached miniature microphone capsules Swivel mount for detached miniature microphone capsules. A rubber shock mount suppresses structure-borne noise. The swivel mount has an M 6... Lire la suite
Stand mount with microphone mount made of metal The microphone mount of the SG 289 is made of metal. It has a 5/8"-27 thread, plus a thread adapter to connect to 1/2"- and 3/8" stands.
Stand mount with microphone mount made of metal The microphone mount of the SG 287 is made of metal. It has a swivel mount has a 5/8"-27 thread, plus a thread adapter to connect to 1/2"- and 3/8"... Lire la suite
Floor stand with gray cast iron base Floor stand with gray cast iron base. The floor stand has a matt black finish and rests on a non-skid rubber disk attached to the bottom. A reversible stud and a... Lire la suite
Small table stand with brass base, very sturdy Small table stand with brass base, very sturdy. It has a black matte finish. The bottom is fitted with a non-slip rubber disk. The stand has a 3/8"... Lire la suite
Floor stand with gray soft-touch powder coating Floor stand with gray soft-touch powder coating. It has a non-skid sound-absorbing rubber disk attached to the bottom. The stand connection has a 3/8"... Lire la suite
Clip to mount the gooseneck of the Miniature Clip Mic system on the strings of a double bass Clip for attaching the capsule and gooseneck of the Miniature Clip Mic system to the strings of a double... Lire la suite
clip to mount the gooseneck of the miniature clip mic system on the strings of a cello Clip for attaching the capsule and gooseneck of the Neumann Miniature Clip Mic MCM system to the strings of a... Lire la suite
Clip to mount the gooseneck of the Miniature Clip Mic system on violin, viola, mandolin and similar instruments Clip for attaching the capsule and gooseneck of the Miniature Clip Mic system to the... Lire la suite
Gooseneck for the Neumann MCMsystem including KC 1, length: 250 mm Flexible gooseneck for the Neumann Miniature Clip Mic MCM system. The microphone capsule is mounted with a detachable screw... Lire la suite
Gooseneck for the Neumann MCM system including KC 1, length: 100 mm Flexible gooseneck for the Neumann Miniature Clip Mic MCM system. The microphone capsule is mounted with a detachable screw... Lire la suite
