NP1 Adaptor - TA4 connector NPA power adaptors are the most basic of all the power adaptors that we manufacture. They offer a unregulated battery output from a single fly lead. The TA4 version is... Lire la suite
NP1 Adaptor " Hirose 4-pin Male " 4 Ouputs Switched The NPB-SQN4S is fitted with an SQN(Hirose) connector and also fully loaded with four switched auxiliaries (Hirose Connectors). These outputs are... Lire la suite
NP1 Adaptor - TA4 connector - 4 Outputs Switched NPC power adaptors have all the benefits of the NPB range but are supplied in a different format. The orientation of the fitted adaptor, means that... Lire la suite
NP1 8-way display distribution adaptor To begin with a distribution unit NPD-8S will be available with a display, whilst boasting up to 8x Hirose outputs, six of these switched in three's and two... Lire la suite
NP1 Adaptor (DATA) shoe - 2x TA4 + master switch Using these connectors will allow you to draw more power from the 8-way distro box, meaning you can use each output on the distro without being... Lire la suite
NP1 Adaptor - TA4 connector - 4 Outputs Switched 9-12V The NPU-TA4 is fitted with a TA4 connector suited for the Sound Devices Scorpio and also features four switched auxiliaries (Hirose sockets).... Lire la suite
Sound Device Power Adaptor - Mix Pre3/6 - Hirose Adaptor The adaptor slots onto the rear of the mixer just like Sound Devices original battery sled, this will click into place to ensure a secure... Lire la suite
Sound Device Power Adaptor - Mix Pre3/6 - Sony DV Adaptor The adaptor slots onto the rear of the mixer just like the battery compartment, this will click into place to ensure a secure connection.
Sound Device Power Adaptor - Mix Pre3/6 - Canon BP Adaptor The adaptor slots onto the rear of the mixer just like the battery compartment, this will click into place to ensure a secure connection.
Sound Device Power Adaptor - Sony DV - Mixpre This will offer an NPF fitting to our SD-1 product which allows you to mount directly to the rear of the mix-pre-unit. . A cable of 30 cm will be offered... Lire la suite
Sound Device Power Adaptor - Sony DV 2x HRS 12V - Mixpre This will offer an NPF fitting to our SD-1 product which allows you to mount directly to the rear of the mix-pre-unit. . SD-6 will also... Lire la suite
The Hawk-Woods SL-1 is suitable for charging one Lithium-ion NP1 battery at a time. This is a low cost unit offering a compact solution as both a camera operators primary charger, or for those... Lire la suite
Microphone concealing solution for the DPA 4060/4061/4062/4063/4071 series with 4 different holders with each its own use, Beige colour Shirt-holder, Bra-holder, T-shirt-holder and Tie-holder. With... Lire la suite
Microphone concealing solution for the DPA 4060/4061/4062/4063/4071 series with 4 different holders with each its own use, Black colour Shirt-holder, Bra-holder, T-shirt-holder and Tie-holder. With... Lire la suite
Microphone concealing solution for the DPA 4060/4061/4062/4063/4071 series with 4 different holders with each its own use, Transparent Shirt-holder, Bra-holder, T-shirt-holder and Tie-holder. With... Lire la suite
Microphone concealing solution for the DPA 4060/4061/4062/4063/4071 series with 4 different holders with each its own use, White colour Shirt-holder, Bra-holder, T-shirt-holder and Tie-holder. With... Lire la suite
Microphone concealing solution for the DPA 6060/6061 series and Sennheiser MKE1 with 4 different holders with each its own use, Beige colour Shirt-holder, Bra-holder, T-shirt-holder and Tie-holder.... Lire la suite
Microphone concealing solution for the DPA 6060/6061 series and Sennheiser MKE1 with 4 different holders with each its own use, Black colour Shirt-holder, Bra-holder, T-shirt-holder and Tie-holder.... Lire la suite
Microphone concealing solution for the DPA 6060/6061 series and Sennheiser MKE1 with 4 different holders with each its own use, Transparent Shirt-holder, Bra-holder, T-shirt-holder and Tie-holder.... Lire la suite
Microphone concealing solution for the DPA 6060/6061 series and Sennheiser MKE1 with 4 different holders with each its own use, White colour Shirt-holder, Bra-holder, T-shirt-holder and Tie-holder.... Lire la suite
Microphone concealing solution for the Sanken COS11 lavalier microphone with 4 different holders with each its own use, Beige colour The set contains 4 different holders with each its own use.... Lire la suite
Microphone concealing solution for the Sanken COS11 lavalier microphone with 4 different holders with each its own use, Black colour The set contains 4 different holders with each its own use.... Lire la suite
Microphone concealing solution for the Sanken COS11 lavalier microphone with 4 different holders with each its own use, Transparent With the Hide-a-mic soft and flexible concealer sets you can easily... Lire la suite
Microphone concealing solution for the Sanken COS11 lavalier microphone with 4 different holders with each its own use, Grey colour The set contains 4 different holders with each its own use.... Lire la suite
Microphone concealing solution for the Sanken COS11 lavalier microphone with 4 different holders with each its own use, Transparent The set contains 4 different holders with each its own use.... Lire la suite
Microphone concealing solution for the Sanken COS11 lavalier microphone with 4 different holders with each its own use, White colour The set contains 4 different holders with each its own use.... Lire la suite
Pressure sensitive Sticky Tape 3 meter x 12mm in black tin Hide-a-mic pressure sensitive butyl tape is a great way to mount a lavalier microphone, secure noisy jewelry and other props. Hide-a-mic... Lire la suite
The IDX JL-2PLUS will sequentially charge Li-ion, Ni-Cd and Ni-Mh NP-style batteries It will charge the first battery connected to either channel, automatically charging the second battery after the... Lire la suite
96Wh Li-Ion NP-Style Battery w 2x D-Tap NP-9X is the successor of the NP-L7S, the industry standard NP-style battery for powering audio equipment. It now features more capacity at 96Wh, two D-Tap... Lire la suite
The NP-L7S is the economical version of the NP-L7 battery with 3 LED Power Indicator but no Digi-View feature IDX NP Li-ion batteries can also be charged on ENDURA system V-Mount chargers using the... Lire la suite
