DigiLink Female to Mini-DigiLink Male Adapter. This DigiLink female to Mini-DigiLink male DigiLink Adapter fits the male end of any full-sized DigiLink cable. If you want to connect your Legacy Pro... Lire la suite
In-Line XLR Soft-knee barrel limiter. 2x Barrels An Over-Killer is an XLR barrel version of the same switchable soft-clip limiter found on our revered audio interfaces. Designed to get more out of... Lire la suite
Connects microphones with an XLR-type connector to the 3.5 mm inputs found on camcorders and other recording devices. The Shure A96F transformer connects microphones with an XLR-type connector to the... Lire la suite
The A95UF is a Line Matching Transformer, Low Impedance Female XLR to High Impedance MC1M Connector with Mating 1/4-inch Phone Plug/Jack. The Shure A95UF is a reversible transformer that matches... Lire la suite
Line Matching Transformer, Low Impedance Male XLR to High Impedance MC1M Connector with Mating 1/4-inch Phone Plug/Jack. This reversible transformer matches low- or high-impedance microphones to... Lire la suite
Battery-powered 700 Hz signal source used to troubleshoot audio systems by checking microphone lines for correct patching and detecting unusual noise that is present. The Shure A15TG Tone Generator... Lire la suite
Reduces interference from AM radio stations that may bleed into microphone lines when using long cables. The Shure A15RF reduces interference from AM radio stations that may bleed into microphone... Lire la suite
The Shure A15PRS is a Switchable Phase Reverser. Reverses the phase (polarity) of a balanced audio signal. The Shure A15PRS reverses the phase (polarity) of a balanced audio signal. Typical use... Lire la suite
Reduces the level of an audio signal by 50dB, which allows a line level output to be connected to a microphone input. The Shure A15LA 50 dB attenuator reduces the level of an audio signal by 50dB.... Lire la suite
The Shure A15HP is an In-Line High Pass Filter. Balanced XLR in-line filter that reduces low frequencies below 100 Hz. The Shure A15HP in-line filter passes mid and high frequencies while reducing... Lire la suite
Matches, bridges, or isolates balanced and unbalanced devices of different impedances and levels. Male XLR to female XLR. The Shure A15BT Bridging Transformer can be used to connect balanced and... Lire la suite
The Shure A15AS is a Switchable in-line attenuator reduces the level of any balanced microphone or line-level signal by 15, 20, or 25 dB. The Shure A15AS Switchable In-Line Attenuator reduces the... Lire la suite
Hosa MIT-435 is an adaptor designed to match 200R output impedance to 50K input impedance. It is ideal for connecting a microphone to hi-Z instrument jack. MIT-435 Mic Transformer, XLR Female LO-Z... Lire la suite
Hosa MIT-129 is an adaptor designed to match 50K output impedance to 200R input impedance. It is ideal for connecting a hi-Z instrument to a microphone input. MIT-129 Mic Transformer, 1/4" Female... Lire la suite
Hosa YRA-167 splits a stereo signal. Black & red-coded phono jacks indicate left and right respectively. Adapts a stereo cable w/ phono plugs to a mini stereo phone jack. Y-Cable: Right Angle Stereo... Lire la suite
Hosa YRA-154 is designed to split a stereo signal. Black & red-coded phono jacks indicate left and right respectively. Y-Cable: Stereo 3.5mm (1/8") Male to Two RCA Females, Length: 6 inches
Hosa YMM-261 is designed to split a stereo signal. Black- and red-coded mini mono phone plugs indicate left and right respectively. 3.5 mm TRS to Dual 3.5 mm TSF. Y-Cable: 3.5 mm TRS to dual 3.5 mm... Lire la suite
Hosa YPR-257 is designed to split a stereo signal. Black & red coded phono jacks indicate left and right respectively. Adapts a stereo cable w/ phono plugs to a stereo phone jack. Y-Cable: Stereo... Lire la suite
