In-Line XLR Soft-knee barrel limiter. 2x Barrels An Over-Killer is an XLR barrel version of the same switchable soft-clip limiter found on our revered audio interfaces. Designed to get more out of... Lire la suite
Battery-powered 700 Hz signal source used to troubleshoot audio systems by checking microphone lines for correct patching and detecting unusual noise that is present. The Shure A15TG Tone Generator... Lire la suite
The Shure A15PRS is a Switchable Phase Reverser. Reverses the phase (polarity) of a balanced audio signal. The Shure A15PRS reverses the phase (polarity) of a balanced audio signal. Typical use... Lire la suite
In situations where microphone inputs are overloaded, we recommend inserting the MDZ 10 into the signal path between the microphone cable and the microphone input. The advantage of this setup over... Lire la suite
Connects microphones with an XLR-type connector to the 3.5 mm inputs found on camcorders and other recording devices. The Shure A96F transformer connects microphones with an XLR-type connector to the... Lire la suite
600 Ohm Transformer: Provides transformer isolation between equipment. Professional Sound Corporation has designed and built a range of adapter barrels to meet the needs of the professional sound... Lire la suite
DigiLink Female to Mini-DigiLink Male Adapter. This DigiLink female to Mini-DigiLink male DigiLink Adapter fits the male end of any full-sized DigiLink cable. If you want to connect your Legacy Pro... Lire la suite
Matches, bridges, or isolates balanced and unbalanced devices of different impedances and levels. Male XLR to female XLR. The Shure A15BT Bridging Transformer can be used to connect balanced and... Lire la suite
The Shure A15HP is an In-Line High Pass Filter. Balanced XLR in-line filter that reduces low frequencies below 100 Hz. The Shure A15HP in-line filter passes mid and high frequencies while reducing... Lire la suite
Reduces interference from AM radio stations that may bleed into microphone lines when using long cables. The Shure A15RF reduces interference from AM radio stations that may bleed into microphone... Lire la suite
Line Matching Transformer, Low Impedance Male XLR to High Impedance MC1M Connector with Mating 1/4-inch Phone Plug/Jack. This reversible transformer matches low- or high-impedance microphones to... Lire la suite
The A95UF is a Line Matching Transformer, Low Impedance Female XLR to High Impedance MC1M Connector with Mating 1/4-inch Phone Plug/Jack. The Shure A95UF is a reversible transformer that matches... Lire la suite
48PH to 12T: Allows "12T" microphones to operate from mixers with 48PH power. Professional Sound Corporation has designed and built a range of adapter barrels to meet the needs of the professional... Lire la suite
High Pass Filter: Provides a low frequency cutoff, -3dB @ 140 HZ, to prevent low frequency rumble. Professional Sound Corporation has designed and built a range of adapter barrels to meet the needs... Lire la suite
Line Drying: Allows interfacing between wired intercom systems, and audio mixers by removing DC voltage. Professional Sound Corporation has designed and built a range of adapter barrels to meet the... Lire la suite
The Shure A15AS is a Switchable in-line attenuator reduces the level of any balanced microphone or line-level signal by 15, 20, or 25 dB. The Shure A15AS Switchable In-Line Attenuator reduces the... Lire la suite
Reduces the level of an audio signal by 50dB, which allows a line level output to be connected to a microphone input. The Shure A15LA 50 dB attenuator reduces the level of an audio signal by 50dB.... Lire la suite
48PH to 12T: Allows "12T" microphones to operate from mixers with 48PH power. Professional Sound Corporation has designed and built a range of adapter barrels to meet the needs of the professional... Lire la suite
15" Low-Profile XLR-3F Female to Low-Profile TA3M "Mini XLR" 3-pin Male cable for Microphone or Wireless to Canon EOS C70 Audio Balanced Audio Input 15" Low-Profile Right Angle XLR-3F to Low-Profile... Lire la suite
3.5mm mini jack to transformer balanced 3-pin XLR power converter, allows the use of microphones requiring 3-5v to be used on 24-48v phantom power The RØDE VXLR Pro is a female TRS mini-jack to male... Lire la suite
Hosa ATT-448 attenuates a dynamic microphone. Selectable -20 dB, -30 dB, or -40 dB attenuation make it ideal for karaoke, public speaking, or where a single microphone is shared. ATT-448 Input... Lire la suite
Hosa MIT-435 is an adaptor designed to match 200R output impedance to 50K input impedance. It is ideal for connecting a microphone to hi-Z instrument jack. MIT-435 Mic Transformer, XLR Female LO-Z... Lire la suite
Hosa MIT-129 is an adaptor designed to match 50K output impedance to 200R input impedance. It is ideal for connecting a hi-Z instrument to a microphone input. MIT-129 Mic Transformer, 1/4" Female... Lire la suite
