Slim line, low-profile mount designed to be rigged where larger mounts cannot go. For Sennheiser MKE1, White colour They are made from a hardened plastic which does not deform or snap under pressure.... Lire la suite
TC input cable, BNC/M 90° to Lemo 5-pin 90°, LEMO outlet orientation at 9 o'clock Because different Lemo connectors are needed for differing cable outlet directions, it is mandatory to specify the... Lire la suite
Waterproof hard case with a lightweight, tough resin shell and PowerClaw superior latching system. Includes pre-scored removable high-quality polyurethane foam. The lightweight NANUK 930 secures... Lire la suite
4 Conductors TA4F + 2 Conductors HRS4 Y output cable for eSMART batteries This cable can be used to connect 1 x AUDIOROOT eSMART battery to 1 x SMBus compatible device with TA4F input (such as the... Lire la suite
The MX-USBY is a Y cable with one USB-C connector and two USB-A connectors, used for powering the Sound Devices MixPre-3 and MixPre-6 audio recorders from a computer.
Slip-on fur and open-cell foam windshield kit suitable for shotgun microphones, with slots no further than 15cm from the front of the mic and a diameter of 19-22mm. The Softie Windshield Kit includes... Lire la suite
Windshield kit suitable for the Sennheiser MKH 8000 series microphones when used with their MZX XLR modules attached. The Modular Windshield Kit is the professionals' choice when maximum isolation... Lire la suite
Mounting a Sony ECM-V1 in clothing or costumes and on the body has just become much easier. The Lav Concealer for Sony ECM-V1 is a soft pliable mount that covers many different mounting options,... Lire la suite
The RØDE Mini-Boompole is a lightweight, high grade professional boom pole. The Mini-Boompole allows you to mount your microphone securely and swivel it in a range of directions that will allow you... Lire la suite
The Rycote Windjammer 4 is suitable for use with the Windshield 4. The Windjammer first introduced by Rycote is a high quality synthetic fur-cover, which provides the highest possible protection... Lire la suite
Viviana Bag provides to organize and protect your lavaliers or accessories into your backpack or case in the trip. Foldable Design, Easy to Carry: Viviana Bag case is easy to fold, convenient and... Lire la suite
Lightweight aluminum bracket with 15mm rod support for the Tentacle Sync E. Simply slide the Tentacle Sync E on and clamp it with the built-in screw. The bracket can be mounted to any camera rig or... Lire la suite
Suspension for Schoeps CMIT or CMC+CUT1 or Sanken CS-3e - Soft grade OSIX CMIT is an adaptation of the OSIX 3, for the new Schoeps CMIT 5 microphone.. With the benefit of its lightness, size and... Lire la suite
Each package of The Invisible Lav Covers Big Bag - Fur Outdoor consists of 40 pieces of fur squares, white color FOR ULTIMATE WIND PROTECTION AND NOISE REDUCTION.... The Invisible Lav Covers - Fur... Lire la suite
The DR-701D is TASCAM's flagship recorder for single-shooter video production. A timecode generator is included for location reference, which can be jam synced in SMPTE. The HDMI in and out allows a... Lire la suite
The Audioroot uPRE MKII is the successor of the uPRE microphone preamp which was first introduced in 2010. The new MKII's electronic design benefits from many enhancements including a 24bits/192kHz... Lire la suite
Overcovers specifically designed for use with small personal microphones in windy outdoor conditions. 30 x Stickies, 6 x Grey fur discs. Using stickies to affix the Lavalier Mic onto the skin or on... Lire la suite
24" Hirose to single right angle for Lectrosonics UCR receivers and ISO9VOLT/SMBATELIM Battery Eliminators. Lectrosonics to Hirose 4. Compatible with Lectrosonics portable receivers like UCR401,... Lire la suite
Microphone concealing solution for the Sanken COS11 lavalier microphone with 4 different holders with each its own use, Black colour The set contains 4 different holders with each its own use.... Lire la suite
The 19mm Softie-Lite 19 Fur Screen Kit from Rycote includes a Softie-Lite windscreen, an INV-Lite shockmount, and a Shortie jumper cable with low-profile XLR-3F connector and integrated XLR holder.... Lire la suite
Rain Cover for QWB with UMP and Body-pack Transmitter Coverage for Quickpole wireless boom mount (QWB) assembled with Ambient phantom power unit (UMP II) and Lectrosonics wireless transmitter (SMb).
Wireless transmitter thigh strap, 4"x 24" unstretched, beige colour Viviana Straps are the safest and most comfortable way to let talents wear your TX and they are made from an amazing slim,... Lire la suite
The Ursa Body Worn Straps - Large waist with a small pouch that fits all industry standard transmitters. Large Waist 95-128cm (37-50) In order to make the most comfortable low-profile straps we... Lire la suite
Wireless transmitter ankle strap, 4"x 15" unstretched, black colour Viviana Straps are the safest and most comfortable way to let talents wear your TX and they are made from an amazing slim,... Lire la suite
Timecode transmission cable for connecting any Tentacle Sync Box to a device with a 6.3mm jack input. You need this cable, if you want to use cameras and audio-recorders with audio-jack inputs that... Lire la suite
Flip mount for small tablet to work in an ENG audio bag. Designed to fit into the elastic receiver straps provided in most ENG bags and thin enough to still allow a receiver to share the same strap.... Lire la suite
