4 Conductors TA4F + 2 Conductors HRS4 Y output cable for eSMART batteries This cable can be used to connect 1 x AUDIOROOT eSMART battery to 1 x SMBus compatible device with TA4F input (such as the... Lire la suite
24" Hirose to single right angle for Lectrosonics UCR receivers and ISO9VOLT/SMBATELIM Battery Eliminators. Lectrosonics to Hirose 4. Compatible with Lectrosonics portable receivers like UCR401,... Lire la suite
NP1 Adaptor " Hirose 4-pin Male " 4 Ouputs Switched The NPB-SQN4S is fitted with an SQN(Hirose) connector and also fully loaded with four switched auxiliaries (Hirose Connectors). These outputs are... Lire la suite
Dual HRS4 Y cable This cable can be used to connect 2 x Hirose 4 pin power inputs to a single Hirose 4 pin output. Overall length : 60cm " custom lengths on request. HRS4 pinout:. BATT (-). N.C. N.C.... Lire la suite
Battery output Y cable - 2 x HRS4 cable This cable can be used to connect 1 x AUDIOROOT eSMART battery to 2 x Hirose inputs. Overall length : 60cm " custom lengths on request. HRS4 pinout:. BATT... Lire la suite
24" x 2 Hirose to dual right angle for Lectrosonics UCR receivers and ISO9VOLT/SMBATELIM Battery Eliminators. Compatible with Lectrosonics portable receivers like UCR401, UCR411A etc. and... Lire la suite
The RM is a compact Volt meter, Amp meter, & ON/OFF controller. It can be mounted so the operator can see the meter (volts & amps) & remotely turn the attached equipment on & off The RM utilizes a... Lire la suite
The BDSv4U is a Battery Distribution System. (1) DC input (TA4M), (6) locking coaxial outlets and (1) USB port. Fused, low battery indicator, meter port and more Remote Audio's BDS system consists of... Lire la suite
Motorola PMLN7101A charges up to six radios or batteries simultaneously with this compact, multi-unit charger. Each pocket on the charger includes an LED indicator, providing charge status on each... Lire la suite
Sony NP-F Battery Charger " 2-Channel Simultaneous It has been designed for use with our range of MDV range, However is also 100% compatible with the Sony NP-F series. . 1.8A charge current
Sound Device Power Adaptor - Sony DV - Mixpre This will offer an NPF fitting to our SD-1 product which allows you to mount directly to the rear of the mix-pre-unit. . A cable of 30 cm will be offered... Lire la suite
Charger for 2 LB-50 40106-1 Batteries, USB Battery charger for two Lectrosonics LB-50 batteries, powered via USB micro-B or USBC. Includes charger and USB cable. Batteries not included.
NP1 Adaptor - TA4 connector - 4 Outputs Switched NPC power adaptors have all the benefits of the NPB range but are supplied in a different format. The orientation of the fitted adaptor, means that... Lire la suite
The Audioroot ELC-PO10-S charger is fully compatible with our eSMART LiFe-256Wh and eSMART LiFe-576Wh batteries. This Smart Charger is designed to charge 12.8V(4 Cells) LiFePO4 batteries with a... Lire la suite
Hirose DC distribution box, 10 x 4-pin sockets with lead to Hirose 4-pin Male Generally all Hirose distribution boxes have a lead with Hirose 4-pin connector.. On request we also manufacture the... Lire la suite
The RM is a compact Volt meter, Amp meter, & ON/OFF controller. It can be mounted so the operator can see the meter (volts & amps) & remotely turn the attached equipment on & off The RM utilizes a... Lire la suite
The MX-4AA is a spare battery sled for the Sound Devices MixPre-3 and MixPre-6 audio recorders. This sled holds four AA batteries. Rechargeable NiMH batteries are recommended.
Hirose DC distribution box, 4 x 4-pin sockets with lead to Hirose 4-pin Male Ambient manufactures Hirose distribution boxes with up to 10 sockets.... Generally all Hirose distribution boxes have a... Lire la suite